I-1.75mm PLA kunye ne-filament PLA pro yokuprinta kwe-3D

Inkcazo:

• I-1KG enetha (malunga ne-2.2 lbs) ye-PLA+ Filament ene-Black Spool.

• I-Filament ye-PLA enamandla ngokuphindwe kalishumi kune-PLA Filament eqhelekileyo.

• Isiphelo esithambileyo kune-PLA eqhelekileyo.

• Akukho ntambo/iqamza/i-Tangle/i-Warping/i-stringing, i-layer adhesion ingcono. Kulula ukuyisebenzisa.

• I-PLA plus (PLA+ / PLA pro) I-Filament iyahambelana neeprinta ezininzi ze-3D, ilungele ukuprintwa kwezinto zokuhombisa, iiprototypes, iithoyi zedesika, kunye nezinye iimveliso zabathengi.

• Ithembekile kuzo zonke iiprinta ze-FDM 3D eziqhelekileyo, ezifana neCreality, MK3, Ender3, Prusa, Monoprice, FlashForge njl.

Umbala:Mhlophe (imibala eli-10 yokukhetha)

Ubungakanani:1.75mm/2.85mm/3.0mm

Ukusinda okushiyekile:1kg/iqhekeza

Thumela i-imeyile kuthi

Inkcazo

Iiparamitha zeMveliso

Cebisa useto lokuprinta

Iithegi zeMveliso

Iimpawu zeMveliso

Uphawu	uTorwell
Izinto eziphathekayo	I-PLA yeprimiyamu eguquliweyo (iNatureWorks 4032D / iTotal-Corbion LX575)
Ububanzi	1.75mm/2.85mm/3.0mm
Ukusinda okushiyekile	1 kg/iqhekeza; 250g/iqhekeza; 500g/iqhekeza; 3kg/iqhekeza; 5kg/iqhekeza; 10kg/iqhekeza
Ubunzima bokuqala	1.2Kg/ngespoyile
Ukunyamezelana	± 0.03mm
Ubude	1.75mm(1kg) = 325m
Indawo yokugcina izinto	Yomile kwaye inomoya
Indawo yokomisa	55˚C kangangeeyure ezi-6
Izixhobo zenkxaso	Faka isicelo ngeTorwell HIPS, iTorwell PVA
Ukuvunywa kweSatifikethi	I-CE, i-MSDS, i-Reach, i-FDA, i-TUV, i-SGS
Iyahambelana ne	I-Makerbot, i-UP, i-Felix, i-Reprap, i-Ultimaker, i-End3, i-Creality3D, i-Raise3D, i-Prusa i3, i-Zortrax, i-XYZ Printing, i-Omni3D, i-Snapmaker, i-BIQU3D, i-BCN3D, i-MK3, i-AnkerMaker kunye nazo naziphi na ezinye iiprinta ze-FDM 3D
Iphakheji	1kg/iqhekeza; ii-8spools/ctn okanye ii-10spools/ctn ingxowa yeplastiki evaliweyo ene-desiccant

Imibala Engakumbi

Umbala ofumanekayo:

Umbala osisiseko	Mhlophe, Mnyama, Mbovu, Luhlaza okwesibhakabhaka, Mthubi, Luhlaza, Isilivere, Ngwevu, Orenji, Igolide
Omnye umbala	Umbala owenziwe ngokwezifiso uyafumaneka

Umboniso weModeli

Izatifikethi

i-ROHS; i-REACH; i-SGS; i-MSDS;

Iphakheji

I-roll PLA+ filament eyi-1kg ene-desiccant kwiphakheji ye-vaccum. I-spool nganye kwibhokisi nganye (Ibhokisi yeTorwell, Ibhokisi engathathi cala, okanye ibhokisi eyenzelwe wena) Iibhokisi ezi-8 kwibhokisi nganye (ubungakanani bebhokisi yi-44x44x19cm)

Indawo yoMzi-mveliso

Iindlela zokuthumela

Kwisampulu, uvavanyo okanye iodolo engxamisekileyo, kuya kusetyenziswa ukuthunyelwa ngokukhawuleza okanye ngenqwelo-moya. Ngelixa kuodolo olukhulu, kudla ngokuthunyelwa ngolwandle. Siza kukucebisa indlela efanelekileyo ixhomekeke kubungakanani bakho kunye nexesha olifunayo lokuthumela.

Contact with us via email info@torwell3d.com or whatsapp +13798511527.
Siza kukunika ingxelo zingadlulanga iiyure ezili-12.

Ngaphambili: I-3D Printer Filament Carbon Fiber PLA Black Color

Okulandelayo: I-PLA+ filament I-PLA kunye ne-filament Umbala omnyama

Uxinano	1.23 g/cm3
Isalathisi sokuhamba kweNyibiliki (g/10min)	5 （190℃/2.16kg）
Ubushushu obuPhambukayo	53℃, 0.45MPa
Tensile strength	65 MPa
Ukwandiswa ngexesha lokuphumla	20%
Amandla okuGuquka	75 MPa
Imodulus eguquguqukayo	I-MPa yowama-1965
Amandla empembelelo ye-IZOD	9kJ/㎡
Ukuqina	4/10
Ukuprintwa	9/10

Ubushushu bomkhupheli (℃)	200 – 230℃Icetyiswayo ngama-215℃
Ubushushu bebhedi (℃)	45 – 60°C
Ubungakanani beNozzle	≥0.4mm
Isantya sefeni	Kwi-100%
Isantya sokuprinta	40 – 100mm/s
Ibhedi Efudumeleyo	Ukhetho
Iindawo zokwakha ezicetyiswayo	Iglasi eneglu, iphepha lokugquma, iBlue Tape, iBuilTak, iPEI