Intambo yePrinta ye-ABS ye-3D, Umbala oLuhlaza okwesibhakabhaka, intambo ye-ABS ye-1kg yeSpool eyi-1.75mm
Iimpawu zeMveliso
I-ABS yintambo ekwaziyo ukumelana nokuchaphazeleka kakhulu, ekwaziyo ukumelana nobushushu evelisa uyilo oluqinileyo nolunomtsalane. Ithandwa kakhulu kwi-prototyping esebenzayo, i-ABS ibukeka intle nokuba ipholishiwe okanye ayipholishwanga. Sebenzisa ubuchule bakho ukuya kuthi ga kumda kwaye ikuvumele ukuba udale izinto ezintsha.
Ubushushu bokukhupha/bokuphefumla obucetyiswayo:230 °C - 260°C (450℉~ 500℉ )，
Ubushushu bebhedi eshushu:80°C - 110°C (176℉~ 212℉)/ Intonga yePVP iyanceda.
Isantya sokuprinta:30~100 mm/s (1,800~4,200mm/ min).
Umlandeli:Iphantsi ukuze umgangatho womphezulu ube ngcono; Ivaliwe ukuze ibe namandla angcono.
Ububanzi beFilaments kunye nokuchaneka:1.75 mm +/- 0.05.
Iifilamenti Ubunzima obupheleleyo:1 kg (2.2 lbs)
| Uphawu | uTorwell |
| Izinto eziphathekayo | QiMei PA747 |
| Ububanzi | 1.75mm/2.85mm/3.0mm |
| Ukusinda okushiyekile | 1 kg/iqhekeza; 250g/iqhekeza; 500g/iqhekeza; 3kg/iqhekeza; 5kg/iqhekeza; 10kg/iqhekeza |
| Ubunzima bokuqala | 1.2Kg/ngespoyile |
| Ukunyamezelana | ± 0.03mm |
| Ubude | 1.75mm(1kg) = 410m |
| Indawo yokugcina izinto | Yomile kwaye inomoya |
| Indawo yokomisa | 70˚C kangangeeyure ezi-6 |
| Izixhobo zenkxaso | Faka isicelo ngeTorwell HIPS, iTorwell PVA |
| Ukuvunywa kweSatifikethi | I-CE, i-MSDS, i-Reach, i-FDA, i-TUV, i-SGS |
| Iyahambelana ne | I-Makerbot, i-UP, i-Felix, i-Reprap, i-Ultimaker, i-End3, i-Creality3D, i-Raise3D, i-Prusa i3, i-Zortrax, i-XYZ Printing, i-Omni3D, i-Snapmaker, i-BIQU3D, i-BCN3D, i-MK3, i-AnkerMaker kunye nazo naziphi na ezinye iiprinta ze-FDM 3D |
Imibala Engakumbi
Umbala okhoyo
GImibala yamandla: Mhlophe, Mnyama, Mbomvu, Luhlaza okwesibhakabhaka, Mthubi, Luhlaza, Indalo, Isilivere, Ngwevu, Ulusu, Igolide, Pinki, Mfusa, Orenji, Mthubi-golide, Umthi, Luhlaza lweKrisimesi, Luhlaza lweGalaxy, Luhlaza okwesibhakabhaka, Okucacileyo
Imibala yeFluorescent: Ubomvu obukhanyayo, tyheli obukhanyayo, luhlaza obukhanyayo, luhlaza okwesibhakabhaka obukhanyayo
Ukukhanya/Ukukhanya Okumnyama:Ukukhanya/ukukhanya okumnyama okuluhlaza, Ukukhanya/ukukhanya okumnyama okuluhlaza okwesibhakabhaka
Ukutshintsha kombala ngothotho lobushushu: Uluhlaza okwesibhakabhaka ukuya koluhlaza okwesibhakabhaka, Uluhlaza okwesibhakabhaka ukuya komhlophe, Umfusa ukuya kopinki, Ungwevu ukuya komhlophe
Yamkela Umbala we-PMS yoMthengi
Umboniso weModeli
Iphakheji
I-filament ye-ABS eyi-1kg ejikelezayo ene-desiccant kwiphakheji ye-vaccum.
Ibhokisi nganye nganye ifakwe kwibhokisi nganye (ibhokisi yeTorwell, ibhokisi engathathi cala, okanye ibhokisi eyenzelwe wena).
Iibhokisi ezisi-8 kwibhokisi nganye (ubungakanani bebhokisi yi-44x44x19cm).
Iinkcukacha ezithe xaxe
Akukho zinto zifanayo kwaye iinkcukacha ziyahluka, kukho izinto ezimbalwa ezinokunceda ngokuqinisekileyo:
- Valela iprinta:I-ABS inovelwano kutshintsho lobushushu, kungcono ukuqinisekisa ukubaIphrinta ye-3D ivaliwe nokuba ivaliweokanye ubuncinane ukuba ubushushu begumbi abubandanga.
- Sebenzisa ibhedi efudumeleyo:Oku kuyimfuneko. I-ABS inobushushu obuphezulu, xa umaleko wokuqala uphola, iyancipha ngobuninzi, nto leyo ebangela ukuguguleka okufana nokugoba. Xa ibhedi efudumeleyo imalunga ne-110 °C, i-ABS ihlala ikwimeko efana nerabha, nto leyo eyivumela ukuba igobe ngaphandle kokugoba.
- Ukunamathela ngokufanelekileyo ebhedini:Kucetyiswa kakhulu ukusebenzisa i-adhesive agent kwi-build plate ukongeza kwi-heated bed. Kukho iindlela ezininzi onokukhetha kuzo, kuquka i-glue stick, i-Kapton tape, kunyeI-ABS slurry, isisombululo solwelo se-ABS esixutywe ne-acetone.
- Lungisa ukupholisa kakuhle:Ifeni epholisa kancinci ivuthela umoya kumaleko ngamnye ukuze iqine ngokukhawuleza, kodwa kwi-ABS, oku kunokukhokelela ekuguqukeni. Zama ukulungisa useto lokupholisa ubuncinane obufunekayo ukuze udibanise kwaye uphepheukudibanisaIcebo elihle kukucima ifeni yokupholisa ngokupheleleyo kwiileya zokuqala ezimbalwa.
Indawo yoMzi-mveliso
UTorwell, umenzi obalaseleyo onamava angaphezu kweminyaka eli-10 kwi-filament yokuprinta ye-3D
Inqaku elibalulekileyo
Nceda udlulise i-filament kumngxuma ozinzileyo ukuze uphephe ukuxinana emva kokusetyenziswa. I-filament ye-ABS eyi-1.75 ifuna ibhedi yobushushu kunye nomphezulu ofanelekileyo wokuprinta ukuze uphephe ukugoba. Iindawo ezinkulu zinobunzima bokugoba kwiiprinta zasekhaya kwaye ivumba xa liprintiwe linamandla kune-PLA. Ukusebenzisa i-raft okanye i-brim okanye ukunciphisa isantya somaleko wokuqala kunokunceda ukunqanda ukugoba.
Kutheni ukhetha iTorwell ABS Filament?
Izixhobo
Nokuba iprojekthi yakho yamva nje ifuna ntoni na, sinentambo ehambelana nayo nayiphi na imfuneko, ukusuka ekumelaneni nobushushu kunye nokuqina, ukuya ekuguquguqukeni nasekukhupheni ngaphandle kwevumba. Ikhathalogu yethu epheleleyo inika ukhetho olufunayo ukukunceda ugqibe umsebenzi ngokukhawuleza nangokulula.
Umgangatho
Iintambo ze-ABS zeTorwell ziyathandwa luluntu oluprintayo ngenxa yoyilo lwazo olukumgangatho ophezulu, olubonelela ngokucinezela, ukuprinta okungenamaqamza kunye nokuprinta okungenamaqhina. I-spool nganye iqinisekisiwe ukuba iza kubonelela ngenqanaba eliphezulu lokusebenza. Yiloo nto isithembiso sikaTorwell.
Imibala
Enye yezona zinto zibalulekileyo kuyo nayiphi na iprinti ixhomekeke kumbala. Imibala ye-Torwell 3D inesibindi kwaye iyakhanya. Xuba kwaye udibanise imibala eqaqambileyo kunye nemibala ecacileyo kunye ne-gloss, textured, sparkle, transparent, kwaye ifana ne-wood kunye ne-marble-like filaments.
Ukuthembeka
Thembela kuzo zonke iiprinti zakho kuTorwell! Sizama ukwenza ukuprinta kwe-3D kube yinkqubo eyonwabisayo nengenazimpazamo kubathengi bethu. Yiyo loo nto intambo nganye yenziwe ngononophelo kwaye ivavanywa kakuhle ukuze wonge ixesha nomgudu ngalo lonke ixesha uprinta.
| Uxinano | 1.04 g/cm3 |
| Isalathisi sokuhamba kweNyibiliki (g/10min) | 12 （220℃/10kg） |
| Ubushushu obuPhambukayo | 77℃, 0.45MPa |
| Tensile strength | 45 MPa |
| Ukwandiswa ngexesha lokuphumla | 42% |
| Amandla okuGuquka | 66.5MPa |
| Imodulus eguquguqukayo | 1190 MPa |
| Amandla empembelelo ye-IZOD | 30kJ/㎡ |
| Ukuqina | 8/10 |
| Ukuprintwa | 7/10 |
| Ubushushu bomkhupheli (℃) | 230 – 260℃Icetyiswayo ngama-240℃ |
| Ubushushu bebhedi (℃) | 90 – 110°C |
| Ubungakanani beNozzle | ≥0.4mm |
| Isantya sefeni | PHANTSI ukuze kubekho umgangatho ophezulu womphezulu / VALIWE ukuze kubekho amandla angcono |
| Isantya sokuprinta | 30 – 100mm/s |
| Ibhedi Efudumeleyo | Kufuneka |
| Iindawo zokwakha ezicetyiswayo | Iglasi eneglu, iphepha lokugquma, iBlue Tape, iBuilTak, iPEI |
