English
I-PLA plus1

I-Dual Color Silk PLA 3D Filament, i-Pearlescent 1.75mm, i-Coextrusion Rainbow

I-Dual Color Silk PLA 3D Filament, i-Pearlescent 1.75mm, i-Coextrusion Rainbow Umfanekiso oBonisiweyo
  • I-Dual Color Silk PLA 3D Filament, i-Pearlescent 1.75mm, i-Coextrusion Rainbow
  • I-Dual Color Silk PLA 3D Filament, i-Pearlescent 1.75mm, i-Coextrusion Rainbow
  • I-Dual Color Silk PLA 3D Filament, i-Pearlescent 1.75mm, i-Coextrusion Rainbow
  • I-Dual Color Silk PLA 3D Filament, i-Pearlescent 1.75mm, i-Coextrusion Rainbow
  • I-Dual Color Silk PLA 3D Filament, i-Pearlescent 1.75mm, i-Coextrusion Rainbow

I-Dual Color Silk PLA 3D Filament, i-Pearlescent 1.75mm, i-Coextrusion Rainbow

Inkcazo:

Intambo enemibala emininzi

I-Torwell Silk Dual color PLA filament yahlukile kwi-rainbow PLA filament eqhelekileyo, yonke i-intshi yale magic 3D filament yenziwe ngemibala emibini-eluhlaza okwesibhakabhaka nobomvu obomvu, obomvu nogolide, oluhlaza okwesibhakabhaka nobomvu, oluhlaza okwesibhakabhaka noluhlaza. Ke ngoko, uya kufumana yonke imibala ngokulula, nokuba yeyokuprinta okuncinci kakhulu. Iiprinta ezahlukeneyo ziya kubonisa iziphumo ezahlukeneyo. Yonwabele imisebenzi yakho yokuprinta ye-3D.

【I-PLA yeSilika yeMbala emibini】- Ngaphandle kokupolisha, ungafumana umphezulu wokuprinta omhle. Indibaniselwano yombala emibini yefilament ye-PLA yomlingo eyi-1.75mm, Yenza amacala amabini oshicilelo lwakho abonakale ngemibala eyahlukeneyo. Icebiso: Ukuphakama kweleya yi-0.2mm. Gcina ifilament ithe nkqo ngaphandle kokuyijika.

【Umgangatho oPhezulu】- I-Torwell Dual color PLA filament inika iziphumo zokuprinta ezithambileyo, akukho bubble, akukho jamming, akukho warping, iyanyibilika kakuhle, kwaye ihambisa ngokulinganayo ngaphandle kokuvala umlomo okanye i-extruder. 1.75 PLA filament ububanzi obuhambelanayo, ukuchaneka kobukhulu ngaphakathi kwe +/- 0.03mm.

【Ukuhambelana okuphezulu】- I-Filament yethu ye-3D Printer inikezela ngamaqondo obushushu ahlukeneyo kunye nesantya esifanelekileyo kuzo zonke iimfuno zakho ezintsha. I-Towell Dual Silk PLA ingasetyenziswa ngokulula kwiiprinta ezahlukeneyo eziqhelekileyo. Ubushushu bokuprinta obucetyiswayo yi-190-220°C.


  • Umbala:Ibhlowu eNcinci kunye neRose Ibomvu, iBomvu neGolide, iBhlowu neBomvu, iBhlowu neLuhlaza
  • Ubungakanani:1.75mm
  • Ukusinda okushiyekile:1kg/iqhekeza; 250g iphakheji eneziqwenga ezi-4

    • Inkcazo

    Iiparamitha zeMveliso

    Cebisa useto lokuPrinta

    Iithegi zeMveliso

    Iimpawu zeMveliso

    ibhena yeempawu

    Intambo ye-Torwell Dual Color Coextrusion

    Ngokungafaniyo ne-filament ye-PLA yokutshintsha kombala eqhelekileyo, i-intshi nganye yale filament yomlingo ye-3D yenziwe ngemibala emibini. Ke ngoko, uya kufumana ngokulula yonke imibala, nokuba yimiprinti emincinci kakhulu.

    Iinkcukacha Ezintle Zithambileyo kwaye Zikhazimla

    Isizathu sokuba le filament yeprinta ye-3D ibonakale intle ngumphezulu wefilament yesilika yePLA emangalisayo.

    Birandi Tu-orwell
    Izinto eziphathekayo ii-polymer composites Pearlescent PLA (NatureWorks 4032D)
    Ububanzi 1.75mm
    Ukusinda okushiyekile 1kg/iqhekeza; 250g/iqhekeza; 500g/iqhekeza;
    Ubunzima bokuqala 1.2Kg/ngespoyile
    Ukunyamezelana ± 0.03mm
    Lilizwe 1.75mm(1kg) = 325m
    Indawo yokugcina izinto Yomile kwaye inomoya
    Indawo yokomisa 55˚C kangangeeyure ezi-6
    Izixhobo zenkxaso Faka isicelo kunyeTi-orwell HIPS, iTorwell PVA
    Ukuvunywa kweSatifikethi I-CE, i-MSDS, i-Reach, i-FDA, i-TUV kunye ne-SGS
    Iyahambelana ne UMenzibot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker kunye nazo naziphi na ezinye iiprinta ze-FDM 3D
    Iphakheji 1kg/iqhekeza; ii-8spools/ctn okanye ii-10spools/ctningxowa yeplastiki evaliweyo ene-desiccant

    Imibala Engaphezulu

    Umbala ofumanekayo:

    Umbala osisiseko Mhlophe, Mnyama, Mbovu, Luhlaza okwesibhakabhaka, Mthubi, Luhlaza, Silivere, Ngwevu, Igolide, Orenji, Pinki

    Yamkela Umbala we-PMS yoMthengi
    Imibala emibini engaphezulu

    Umboniso weModeli

    Umboniso weModeli

    Iphakheji

    iphakheji

    Indawo yoMzi-mveliso

    i-fortificate11

    UTorwell, umenzi obalaseleyo onamava angaphezu kweminyaka eli-10 kwi-filament yokuprinta ye-3D.

    PHAWULA

    • Gcina intambo imile nkqo kangangoko ngaphandle kokuyijika.

    • Ngenxa yokukhanya okubonakalayo okanye i-display resolution, kukho umbala omncinci phakathi kwemifanekiso kunye nee-filaments.

    • Kukho umahluko omncinci phakathi kweebhetshi ezahlukeneyo, ngoko ke kuyacetyiswa ukuba uthenge i-filament eyaneleyo ngexesha elinye.

    FAQ

    1. Kutheni kungelula ukuncamathisela intambo kwindawo eshushu?

    A: Qinisekisa ukuba iqonga lilinganisiwe, umgama phakathi kwe-nozzle nomphezulu weqonga ufanelekile, ukuze ucingo oluphuma kwi-nozzle lucinezelwe kancinci.

    B: Jonga ubushushu bokuprinta kunye nomgangatho wobushushu bebhedi eshushu. Ubushushu bokuprinta obucetyiswayo yi-190-220°C, kwaye ubushushu bebhedi eshushu yi-40°C.

    C: Umphezulu weqonga ufuna ukucocwa okanye ungasebenzisa umphezulu okhethekileyo, iglu, i-hairspray njl.

    D: Ukunamathela komaleko wokuqala akulunganga, nto leyo enokuphuculwa ngokwandisa ububanzi bomgca we-extrusion komaleko wokuqala nokunciphisa isantya sokuprinta.

    2. Kutheni intambo yesilika ibuthathaka kangaka?

    A: Ukuqina kwesilika pla kuphantsi kunePLA, ngenxa yefomula eyahlukileyo.

    B: Ungalinyusa izinga lobushushu kunye nenani leendonga zangaphandle ukuze ube nokunamathela okungcono komaleko.

    C. gcina intambo yomile ukuze ingaqhekeki.

    3.Ungakuphepha njani ukuqhoboshela?

    A: Ubushushu obuphezulu kakhulu bunokunyusa ukunyibilika kwe-filament emva kokunyibilika, sicebisa ukuba kuncitshiswe ubushushu ukuze kuncitshiswe ukuxinana kwentambo.

    B: Ungafumana umgama ongcono wokurhoxa kunye nesantya sokurhoxa ngokuprinta uvavanyo lokucinezela.

    4.Ungakuphepha njani ukuqhina nokubanjwa?

    A: Qiniseka ukuba ufaka isiphelo esikhululekileyo se-silk pla filament kwimingxunya ukuze ungadibani kwixesha elizayo.

    5.Ungakuphepha njani ukufuma?

    A: Nceda uqinisekise ukuba intambo igcinwa kwingxowa okanye ebhokisini evaliweyo emva kokuprintwa ngakunye ukuthintela ukufuma.

    B: Ukuba intambo sele imanzisile umswakama, yomise e-oven iiyure ezi-4 ukuya kwezi-6 kwi-40-45°C.

  • Ngaphambili:
  • Okulandelayo:
    • Uxinano 1.25g/cm3
    Isalathisi sokuhamba kweNyibiliki (g/10min) 11.3(IsiNgesi)190℃/2.16kg）
    Ubushushu obuPhambukayo 55℃, 0.45MPa
    Tensile strength 57I-MPa
    Ukwandiswa ngexesha lokuphumla 21.5%
    Amandla okuGuquka 78I-MPa
    Imodulus eguquguqukayo 2700 MPa
    Amandla empembelelo ye-IZOD 6.3kJ/㎡
     Ukuqina 4/10
    Ukuprintwa 9/10

    Useto lokuprinta lwe-Dual Silk PLA

    Ubushushu bomkhupheli (℃) 190 – 220℃Icetyisiwe≤200℃fumana ukukhanya okungcono
    Ubushushu bebhedi (℃) 0 – 60°C
    NoUbungakanani be-zzle ≥0.4mm
    Isantya sefeni Kwi-100%
    Isantya sokuprinta 30 –60mm/s; 25-45mm/s kwinto enzima, 45-60mm/s kwinto elula
    LUkuphakama kwe-ayer 0.2mm
    Ibhedi Efudumeleyo Ukhetho
    Iindawo ezicetyiswayo zokwakha Iglasi eneglu, iphepha lokugquma, iBlue Tape, iBuilTak, iPEI
    Bhala umyalezo wakho apha uze uwuthumele kuthi

    Imvelisoiindidi

    Gxila ekuboneleleni ngezisombululo ze-mong pu kangangeminyaka emi-5.

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale