Intambo yeTPU eyi-1.75mm yokuprinta kwe-3D emhlophe Umfanekiso ocacileyo

Intambo yeTPU eyi-1.75mm yokuprinta ye-3D emhlophe

Inkcazo:

Inkcazo: I-TPU Flexible Filament yi-filament esekelwe kwi-thermoplastic polyurethane esebenza ngokukodwa kwiiprinta ezininzi ze-desktop 3D ezikwimarike. Ineempawu zokudambisa ukungcangcazela, ukufunxwa komothuko kunye nobude obumangalisayo. Ithambile ngokwendalo kwaye inokolulwa kwaye iguquguquke lula. Incamathela kakuhle ebhedini, i-low-warp kwaye ayinavumba liphantsi, yenza ii-filaments ze-3D eziguquguqukayo zibe lula ukuziprinta.

Umbala:Mhlophe (imibala eyi-9 onokukhetha kuyo)

Ubungakanani:1.75mm/2.85mm/3.0mm

Ukusinda okushiyekile:1kg/iqhekeza

Thumela i-imeyile kuthi

Inkcazo

Iiparamitha zeMveliso

Cebisa useto lokuprinta

Iithegi zeMveliso

Iimpawu zeMveliso

Uphawu	uTorwell
Izinto eziphathekayo	I-Polyurethane ye-Thermoplastic yodidi oluphezulu
Ububanzi	1.75mm/2.85mm/3.0mm
Ukusinda okushiyekile	1 kg/iqhekeza; 250g/iqhekeza; 500g/iqhekeza; 3kg/iqhekeza; 5kg/iqhekeza; 10kg/iqhekeza
Ubunzima bokuqala	1.2Kg/ngespoyile
Ukunyamezelana	± 0.05mm
Ubude	1.75mm(1kg) = 330m
Indawo yokugcina izinto	Yomile kwaye inomoya
Indawo yokomisa	65˚C kangangeeyure ezisi-8
Izixhobo zenkxaso	Faka isicelo ngeTorwell HIPS, iTorwell PVA
Ukuvunywa kweSatifikethi	I-CE, i-MSDS, i-Reach, i-FDA, i-TUV kunye ne-SGS
Iyahambelana ne	I-Makerbot, i-UP, i-Felix, i-Reprap, i-Ultimaker, i-End3, i-Creality3D, i-Raise3D, i-Prusa i3, i-Zortrax, i-XYZ Printing, i-Omni3D, i-Snapmaker, i-BIQU3D, i-BCN3D, i-MK3, i-AnkerMaker kunye nazo naziphi na ezinye iiprinta ze-FDM 3D
Iphakheji	1kg/iqhekeza; ii-8spools/ctn okanye ii-10spools/ctningxowa yeplastiki evaliweyo ene-desiccant

Imibala Engakumbi

Umbala ofumanekayo:

Umbala osisiseko	Mhlophe, Mnyama, Mbovu, Luhlaza okwesibhakabhaka, Mthubi, Luhlaza, Ngwevu, Orenji, Ecacileyo
Yamkela Umbala we-PMS yoMthengi

Umboniso weModeli

Iphakheji

I-1kg ye-TPU filament eyi-1.75mm ene-desiccant kwiphakheji ye-vaccum.

Ibhokisi nganye nganye ifakwe kwibhokisi nganye (ibhokisi yeTorwell, ibhokisi engathathi cala, okanye ibhokisi eyenzelwe wena).

Iibhokisi ezisi-8 kwibhokisi nganye (ubungakanani bebhokisi yi-44x44x19cm).

Indawo yoMzi-mveliso

FAQ

1.Q: Ngaba izinto ziphuma kakuhle xa kuprintwa? Ngaba ziya kubhideka?

A: le nto yenziwe ngezixhobo ezizenzekelayo ngokupheleleyo, kwaye umatshini ujika ucingo ngokuzenzekelayo. Ngokubanzi, akuyi kubakho ngxaki zokujika.

2.Q: Ngaba kukho amaqamza kwizinto ezisetyenzisiweyo?

A: izinto zethu ziya kubhakwa ngaphambi kokuba zivele ukuze kuthintelwe ukwakheka kwamaqamza.

3.Q: zithini iidayamitha zentambo kwaye zingaphi imibala ezikhoyo?

A: ububanzi bentambo yi-1.75mm kunye ne-3mm, kukho imibala eli-9, kwaye ingenza ngokwezifiso umbala owufunayo ukuba kukho iodolo enkulu.

4,Q: Ithambile kangakanani i-TPU filament?

A: YiShore 95A.

5.Q Kufuneka Ithini Iqondo Lobushushu Lokuprinta Nebhedi kwiTPU?

A: Ubushushu bokuprinta i-TPU buyahluka phakathi kwe-225 ukuya kwi-245 DegC kwaye buyahluka ngokweempawu ezahlukeneyo. Ubushushu bokuprinta i-TPU buphantsi kakhulu njenge-45 ukuya kwi-60 Deg C xa kuthelekiswa ne-ABS. Ungadlala ngamaxabiso ahlukeneyo uze ubone ukuba yeyiphi na efanelekileyo kwiiprinta zakho.

Ngaphambili: I-PETG eluhlaza ye-3D yeeprinta ze-FDM 3D

Okulandelayo: Izixhobo zokuprinta ze-3D ze-TPU ezi-orenji

Uxinano	1.21 g/cm³
Isalathisi sokuhamba kweNyibiliki (g/10min)	1.5 （190℃/2.16kg）
Ukuqina koLwandle	95A
Tensile strength	32 MPa
Ukwandiswa ngexesha lokuphumla	800%
Amandla okuGuquka	/
Imodulus eguquguqukayo	/
Amandla empembelelo ye-IZOD	/
Ukuqina	9/10
Ukuprintwa	6/10

Ubushushu bomkhupheli (℃)	210 – 240℃Icetyiswayo ngama-235℃
Ubushushu bebhedi (℃)	25 – 60°C
Ubungakanani beNozzle	≥0.4mm
Isantya sefeni	Kwi-100%
Isantya sokuprinta	20 – 40mm/s
Ibhedi Efudumeleyo	Ukhetho
Iindawo zokwakha ezicetyiswayo	Iglasi eneglu, iphepha lokugquma, iBlue Tape, iBuilTak, iPEI
Iindawo zokwakha ezicetyiswayo	Iglasi eneglu, iphepha lokugquma, iBlue Tape, iBuilTak, iPEI